Pure Front Kits
Price range: $91.19 through $14,279.40
Ready-bonded touch display modules from 7″ to 27″: cover glass, 10-point projected capacitive touch and LCD optically bonded into one stack, with LED backlight, touch controller and display cable included. Ready to build into your own housing, machine panel or a faytech back kit.
Select a variation above to view the Product Sheet.
Select a variation above to view the 3D Model.
Select a variation above to view the Short Manual.
Select a variation above to view the Manual.
Description
A Pure Front Kit is the display and touch core of a faytech touch monitor, without frame or housing. The cover glass, the projected capacitive touch sensor and the LCD module are optically bonded (Clear Bond®) into one stack. Because there is no air gap, the image stays sharp and readable in bright light, no condensation can form behind the glass, and the glass is stronger. The kits are made for machine builders, kiosk and terminal makers and OEMs who build the display into their own cut-out, housing or front panel.
Three series
- Rubber-frame series (7″ to 27″): 1.1 mm cover glass with chemically etched anti-glare surface and EETI touch controller – the same display module as in faytech rubber-frame touch monitors.
- Aluminum-frame series (7″ to 27″): 2.0 mm strengthened glossy glass and ILITEK touch controller – the cost-effective choice.
- Open-frame series (7″ to 21.5″): 3.0 mm anti-glare glass, 500 cd/m² or 1000 cd/m² (high-brightness). Outdoor versions (10.1″, 15″ and 21.5″) add a 3.2 mm glass with UV/IR protection and a wide-temperature open cell.
What is included
- Touch controller board and touch cable (USB)
- LVDS or eDP panel cable that fits faytech mainboards and back kits
- 7″, 8″ and 9.7″ kits and the 10.1″ rubber-frame kit: LVDS adapter board with LED driver, so the panel connects to a standard 40-pin LVDS port
- LED backlight, with driver board where the panel needs one
For third-party mainboards a cable to your connector is needed; we provide the pinout on request.
Packaging
Choose the packaging with your kit. Single box: one kit per box, any quantity, ideal for samples, spares and small runs. Bulk carton (ODM): full master cartons for series production, at a lower packaging cost per kit; the number of kits per carton depends on the size and is shown with the option. For pallets or mixed orders, request a quote.
Datasheet and English OB drawing for each kit are available under Product Sheet and 3D Models.
Direct sunlight might increase the device temperature beyond the allowed storage and operation conditions. Therefore the devices must be protected against direct sunlight. Devices operated or stored outside the specified temperature ranges are not covered by warranty.
